EWS-210M-12V72 Solar panel monocristalline 12V 210W SOLAR PANEL 210W 12V 11.43A CETL 72 CELL- Quantity: 2
EWC-30LI 12/24V 30A SOLAR CHARGE CONTROLLER - Quantity: 1
GC-225 6V 220AH 440MCA DEEP CYCLE - Quantity: 2
BRS BATTERY offers durable and reliable products at competitive rates. With the changing market and costs of manufacturing, BRS BATTERY has launched the GC-225: a 6 volt 220 amp battery that has superior performance while meeting your budget.
|Capacity 20 hour||220 Ah|
|Width||26.35 cm 10 3/8''|
|Height||27.62 cm 10 7/8''|
|Depth||18.09 cm 7 1/8''|
|Weight||28 kg 61,6 lbs|
QC7515-025 CABLE #1 SWITCH -TO -STARTER 15" QC7515-1 Quantity: 1
#10-2 MARINE WHITE CABLE - PER INCH (240 inches / 20 feet of cable) - Quantity: 1
QC509612-2001 FUSE HOLDER 30A BLADE WATERPROOF 12GA - Quantity: 1
FUSE HOLDER 30A BLADE FH12AWP
WATERPROOF 1 SOCKET - Quantity: 1
FUSE HOLDER 30A BLADE FH12AWP
YF-1001-T MC4 MALE +FEMALE Y SPLITTERS FOR SOLAR PANEL - Quantity: 1
MC4-PAIRE CONNECTOR MC4 PAIR MALE/FEMALE Quantity: 1
MC4-2 SOLAR PANEL MULTI-CONTACT CONNECTORS
EASY AND FAST INSTALLATION OF YOUR SOLAR PANEL WITH MC4-PAIRE CONNECTORS
Today, most solar panels come with approximately 3 ft. of Positive (‘+’) and Negative (‘-‘) wire. One end of each wire is connected to the junction box of the panel. In most solar panels, the other end of each wire is terminated with an MC4 connector. The Positive (‘+’) wire has a Female MC4 Connector and the Negative (‘-‘) wire has a Male MC4 Connector.
To extend the length of the wires of these solar panels for connection to a charge controller, combiner box or grid-connected inverter, an extension wire is required with corresponding Male and Female MC4 Connectors.
The MC4-PAIRE KIT contains 1 male and 1 female MC4 solar panel connector. This type of connector system is easy to install and uses “snap-in” safety locking tabs to lock two mating connectors, thereby avoiding unintentional disconnection.
Once the connectors locked, the mating contacts are sealed against ingress of dust and water.
The Male and Female MC4 Connectors consist of the following components:
• Outer insulated housing with locking arrangement.
• Tin-plated Copper metallic male & female mating contacts. The wire is placed in the crimping area and crimped with a special crimping tool, such as the PV-FMC4
• Nut & internal rubber bush. When the nut is tightened, the internal rubber bush is compressed around the outer jacket of the cable and thus, provides water-tight sealing.
The MC4 connectors provided are compatible for use with AWG #10 or AWG #12 wire with outer insulation diameter 3
MC4-OUTIL ASSEMBLY TOOL FOR MC4 CONNECTORS - Quantity: 1
PROWATT-2000 806-1220 INVERTER 12V 2000W PURE SINE PROWATT SW - Quantity: 1
I have been using this pump all summer to keep my boat, lawn tractor and a whole bunch of other stuff filled up around here. I still use 5 gallon containers for their portability and even with 10 of those I'll have to fill them twice to get through the summer. This pump has been great for my needs. If you are sick and tired of having to hold a 5 gallon container of fuel in the air while attempting to get those funky nozzles to work, buy this pump.
So far it’s working as well as I had hoped. Nothing is perfect when trying to transfer gas, but this does a very decent job. You need to make sure to lift the nozzle and hose up at the end of the fuel transfer to allow any residual fuel to run back into the tank or it will dribble out all over. It empties most of a five gallon gas can in a couple minutes without having to lift and hold the can up which is exactly what I wanted.