ProductContent
GYEON Q² Quick View 120ml
GYEON Q² Quick View 120ml
Water-Repellent Protection for Your Windshield and Exterior Glass
GYEON Q² QuickView is an automotive glass sealant that helps rain bead and move off your windshield, side windows and rear glass. Its integrated felt applicator makes treatment straightforward: prepare the glass, spread an even layer and remove the residue after the recommended wait. It is a practical option for drivers who want a dedicated rain repellent they can apply during a home detailing session.
A clean windshield can still hold a sheet of water during wet weather. QuickView changes how water behaves on the outside of the glass, encouraging droplets to gather and release. The treatment also helps reduce the grip of everyday road film, making subsequent glass cleaning easier. It works alongside normal windshield cleaning and properly maintained wipers.
Key Benefits of GYEON QuickView
- Hydrophobic glass protection: encourages water beading and runoff to help maintain visibility in rain.
- Built-in felt applicator: spreads the sealant directly from the bottle without a separate application block.
- Exterior window coverage: suitable for automotive windscreens and exterior glass surfaces.
- Easier maintenance: helps rain, dirt and road film release from treated glass.
- Convenient top-ups: can be used to refresh water repellency on compatible existing glass coatings.
Product Details
- Size: 120ml.
- Product type: exterior glass sealant and rain repellent.
- Application: integrated felt applicator, followed by microfiber removal.
- Typical consumption: approximately 30ml per car, depending on glass area and application.
- Published maximum durability: up to 6 months; actual life depends on preparation, weather, mileage and wiper use.
How to Apply GYEON QuickView
- Clean and inspect the glass. Wash away road dirt and use a suitable glass cleaner. Remove bonded contamination if necessary, then degrease with GYEON Q²M Prep as directed. Begin with clean, dry glass.
- Work on a cool surface. Park in the shade and have a clean damp microfiber towel and a separate dry glass towel ready.
- Prime the applicator lightly. Place the felt against the glass and gently squeeze to release product. Avoid flooding the surface.
- Spread evenly. Use overlapping circular movements with moderate pressure to produce a uniform, cloudy film. Work in manageable sections so you can check coverage.
- Allow the treatment to set. Current GYEON guidance specifies 5–20 minutes, with a longer wait in colder conditions. Follow the directions on your bottle.
- Remove the residue. Wipe with the damp microfiber until the glass is clear, then finish with the dry towel. Check from several angles for haze before driving.
Application Tips and Things to Watch For
- A heavier layer does not improve the result. Excess product increases the residue you need to remove.
- Preparation matters: oily film, old residue and bonded dirt can make water repellency uneven.
- Use this product on exterior automotive glass. It is not an interior anti-fog treatment.
- Keep wiper blades clean and in good condition. Continue using them whenever visibility requires it.
Frequently Asked Questions
Is QuickView a glass cleaner?
No. It adds water-repellent protection after cleaning. Applying it over dirty glass can trap residue and make it harder to achieve an even, clear finish.
Does it need an overnight cure?
GYEON states that QuickView is ready to use once it has been allowed to set and fully wiped off according to the instructions. Do not confuse that with removing it immediately after spreading.
Will rain roll off at every driving speed?
Water movement depends on airflow, glass angle and rainfall. GYEON lists a starting speed of approximately 70km/h as a reference, not a guarantee. Never change your driving speed to make water move off the glass.
Can I apply QuickView over an existing glass coating?
GYEON permits its use as a topper or refresh. Clean the glass first and check any maintenance restrictions supplied with your existing coating.
Why is the windshield hazy after application?
Unremoved residue or excess product may leave visible haze. Complete the damp-towel removal and dry finishing steps, inspecting the glass carefully. Do not drive until the windshield is clear.
