ProductContent
GYEON Q² Rim EVO Wheel Ceramic Coating
GYEON Q² Rim EVO Wheel Ceramic Coating
GYEON Q² Rim EVO 30 ml – Ceramic Wheel Coating
GYEON Q² Rim EVO is a ceramic wheel coating that helps reduce the adhesion of brake dust and road contamination. Applied to thoroughly prepared wheels, it creates a protective, water-repellent surface that makes regular cleaning easier.
The formula is designed for the heat cycles and contamination wheels encounter in daily use. It suits a range of finishes, including painted, powder-coated, anodised and polished wheels, with compatibility testing where needed. Rim EVO adds colour depth while retaining the character of glossy or matte finishes rather than intentionally turning every wheel high-gloss.
Key Benefits
- Easier brake-dust removal: Helps contamination release during washing.
- Wheel-specific protection: Developed for demanding wheel conditions and heat exposure.
- Hydrophobic performance: Encourages water release and supports easier maintenance.
- Broad finish compatibility: Suitable for common wheel finishes when properly prepared.
- Colour enrichment: Can deepen the appearance without requiring a glossy dressing.
Product Details
| Bottle size | 30 ml |
|---|---|
| Manufacturer-rated durability | Up to 18 months / 45,000 km |
| Typical consumption | Approximately 15–20 ml per wheel set |
| Coating pH tolerance | 2–11 |
| Included | Coating, applicator set and manual |
How to Use
- Clean the wheels thoroughly, removing brake dust, tar and previous protection as needed.
- Ensure the wheels are cool and completely dry, including crevices and bolt recesses.
- Degrease with Q²M Prep and wait 15 minutes before coating, following current GYEON guidance.
- Apply evenly to a small, accessible section using the supplied applicator. Divide intricate wheels into several areas.
- Level and wipe promptly; current guidance specifies approximately 10–30 seconds after application. Watch the product’s behaviour and follow the manual.
- Inspect from multiple angles and keep the coating dry for at least the first 12 hours. Follow the supplied manual for full curing and aftercare.
Application Tips and Things to Watch For
Keep coating away from brake friction surfaces, tire tread and other areas not intended for treatment. If coating compatible clear-coated calipers, work carefully and avoid overspray or transfer onto braking components.
Clean wheels still need regular maintenance after coating. Do not leave heavy brake dust in place indefinitely or rely on the coating to repair corrosion, peeling lacquer or curb damage. A test area is useful where colour darkening would matter.
Frequently Asked Questions
Can Rim EVO be used on matte wheels?
Yes. It is suitable for matte and glossy wheel finishes. It can enrich or darken colour, so test a discreet area first if preserving an exact appearance is important.
Do the wheels have to be removed?
Accessible faces can be coated on the vehicle. Full barrel coverage is easier with access to the entire wheel. Only remove wheels if you can do so safely and reinstall them correctly.
Will it prevent brake dust completely?
No. Braking will continue to generate dust. The benefit is reduced adhesion and easier cleaning, not a wheel that never gets dirty.
How should coated wheels be cleaned?
Use a suitable maintenance shampoo or compatible wheel cleaner, soft tools and a thorough rinse. Reserve stronger contamination-removal steps for when they are actually needed.
Is 30 ml enough for one set?
GYEON lists typical consumption at 15–20 ml per set. Wheel size, design, barrel coverage and application technique affect the amount needed, so treat that as a planning guide.
