Description

EWS-100P-36-I Solar panel polycristalline 12V 100W - EWS-100P-36 SOLAR PANEL POLY 100W 5.56AMP CETL - Quantity: 1

SPECIFICATIONS

Ampères / Amps

5.56A

Marque / Brand

Enerwatt

Garantie / Warranty

30 ans

30 years

Hauteur / Height

1.4" / 35 mm

Largeur / Width

26.6" / 675 mm

Longueur / Length

45.3" / 1150 mm

Numéro de pièce/modèle / Part/Model Number

EWS-100P-36-I

Type de terminal / Terminal Type

MC4

Volts

18.0vmp / 21.9voc

Watts

100W

EWC-30LI  12/24V 30A  SOLAR CHARGE CONTROLLER Quantity: 1

SPECIFICATIONS

Ampères / Amps

30A

Marque / Brand

Enerwatt

Garantie / Warranty

24 M

Hauteur / Height

1.9"/48.3mm

Largeur / Width

4.2"/105.5mm

Longueur / Length

7"/178.5mm

Numéro de pièce/modèle / Part/Model Number

EWC-30LI

Type de terminal / Terminal Type

8AWG

Volts

12/24V

12V 100Ah Deep Cycle Volthium Lithium Battery- Quantity: 1

Description: 

This battery model includes the low temp cut off protection, in a smaller size (group 24), with the same power as the group 31. A 100% Canadian design that allows for 100% optimization of the energy to space ratio.

 

This model offers an LCD screen, whose management of the charge status is controlled by the BMS. This is an exclusivity and a major improvement compared to the competition.

* Note that the display managed by the BMS will be calibrated after 2 complete cycles (discharge/recharge).

Never before has a lithium battery given such an amazing performance as those offered by our product line.

The profitability is assured for at least 10 years, and certainly more!

The BMS is easily accessible to guarantee an extended life for the entire battery park. This makes the battery easily repairable in case of accidental misuse, and avoids having to replace the entire battery bank for a single battery to be replaced.

In addition, the isolated BMS in a private chamber extends the operating range of the battery in terms of temperature, as the heat generated by the BMS will not reach the cells.

Access to the BMS also allows the addition and customization of additional parameters over time.

Our BMS technology (powered by TexasInstrument) specially designed for the harsh Canadian environment, coupled with our Grade A+ Cells (supplier famous for its contracts with LG Chem, Audi, BMW, and Tesla), ensures you have the best battery in North America in your hands.

Easy and quick to install, thanks to their weight 2X LIGHTER than a conventional battery, our lithium batteries offer you a shorter charging time and an energy capacity that does not run out over the years.

Volthium, has a mission to bring together the best parts available from each of the industries and put them together in one battery! Cells, BMS, assembly engineering, it's all there.

KEY FEATURES

• BMS driven LCD display (highly improved accuracy)

• 25lbs weight

• BMS access

• Cold load protection

• Quebec engineering

• 10 year limited warranty

• Peak 200A (30s)

• Peak 300A (3sec)

• Up to 4 batteries in series (up to 51.2V)

#10-2 MARINE WHITE CABLE - PER INCH (240 inches / 20 feet of cable) - Quantity: 1

SPECIFICATIONS

Marque / Brand

Non-applicable / Not-applicable

Garantie / Warranty

Longueur / Length

12 M / 39.37'

Numéro de pièce/modèle / Part/Model Number

10-2AWG-MA-WT12

QC509612-2001 FUSE HOLDER 30A BLADE FH12AWP WATERPROOF 1 SOCKET - Quantity: 1

Ampères / Amps

30A

Marque / Brand

Quick Cable

Garantie / Warranty

Numéro de pièce/modèle / Part/Model Number

QC509612-2001

Volts

32

MC4-PAIRE CONNECTOR MC4 PAIR MALE/FEMALE Quantity: 1

MC4-2 SOLAR PANEL MULTI-CONTACT CONNECTORS

EASY AND FAST INSTALLATION OF YOUR SOLAR PANEL WITH MC4-PAIRE CONNECTORS

Today, most solar panels come with approximately 3 ft. of Positive (‘+’) and Negative (‘-‘) wire. One end of each wire is connected to the junction box of the panel. In most solar panels, the other end of each wire is terminated with an MC4 connector. The Positive (‘+’) wire has a Female MC4 Connector and the Negative (‘-‘) wire has a Male MC4 Connector.

To extend the length of the wires of these solar panels for connection to a charge controller, combiner box or grid-connected inverter, an extension wire is required with corresponding Male and Female MC4 Connectors.

QUICK ASSEMBLY

The MC4-PAIRE KIT contains 1 male and 1 female MC4 solar panel connector. This type of connector system is easy to install and uses “snap-in” safety locking tabs to lock two mating connectors, thereby avoiding unintentional disconnection.

Once the connectors locked, the mating contacts are sealed against ingress of dust and water.

CONNECTOR COMPONENTS

The Male and Female MC4 Connectors consist of the following components:

• Outer insulated housing with locking arrangement.
• Tin-plated Copper metallic male & female mating contacts. The wire is placed in the crimping area and crimped with a special crimping tool, such as the PV-FMC4
• Nut & internal rubber bush. When the nut is tightened, the internal rubber bush is compressed around the outer jacket of the cable and thus, provides water-tight sealing.

CABLE GAUGE

The MC4 connectors provided are compatible for use with AWG #10 or AWG #12 wire with outer insulation diameter 3

SPECIFICATIONS

Marque / Brand

Non-applicable / Not-applicable

Garantie / Warranty

25 ans

25 years

Numéro de pièce/modèle / Part/Model Number

MC4-PAIRE

Marques de certifications / Regulatory Certification Marks

UR

Poids / Weight (kg)

0.02

MC4-OUTIL ASSEMBLY TOOL FOR MC4 CONNECTORS Quantity: 1

Marque / Brand

Non-applicable / Not-applicable

Garantie / Warranty

25 ans

25 years

Numéro de pièce/modèle / Part/Model Number

MC4-OUTIL

Poids / Weight (kg)

0.02

NOCO GENIUS10 AUTOMATIC CHARGER 6/12V 10A AGM/LITHIUM - Quantity: 1

Introducing the all-new GENIUS10, one of our most powerful, highest-performing, energy-efficient, and compact chargers yet. The GENIUS10 is a 6-volt and 12-volt battery charger, battery maintainer, and battery desulfator rated at 10-amp for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.

• Meet the GENIUS10 - Similar to our G7200, just better. It's 17% smaller and delivers 115% more power. And it's simpler and easier to use than ever before.

• Do more with Genius - Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.

• Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.

• Charge dead batteries - Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.

• Simple to set up and use - Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.

• Restore your battery - Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.

• Compatible with all types of vehicles - Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more - you name it.

• Multi-Voltage. Multi-Chemistry. Multi-Battery Type.
  
  
• A multi-functional design that allows you to charge in more ways. Effortlessly charge multiple battery voltages (6-Volt and 12-volt lead-acid and lithium-ion batteries) chemistries (Flooded, gel, maintenance-free and AGM batteries) and types (Starter, deep-cycle, marine, powersport and more).
  
  
• Our Most Powerful, Efficient, and Compact Charger, Yet Compact, yet powerful battery charger. A mix of electrical engineering and industrial design pack a powerful battery charger into a tiny footprint. The GENIUS10 uses high-frequency switch-mode technology to efficiently convert A/C power into safe D/C power for battery charging. And its onboard microcomputer precisely controls the charging to minimize power loss to create an incredibly compact form factor.
  
  
• Improved Start Voltage Sensor. All-New Force Mode.
• 
  The all-new start-voltage sensor allows the GENIUS to detect and charge dead batteries as low as 1-volt. For extremely dead batteries lower than 1-volt, manually turn on force mode to detect and charge batteries all the way down to zero volts.
  More Precise Charging in Any Climate.
• 
  The new integrated thermal sensor automatically monitors and adjusts the charging cycle based on fluctuations of ambient temperature, limiting the chance of under-charging or over-charging, providing a more accurate and fully charged battery. Avoids under-charging in cold weather down to -4 F and avoids over-charging in hot weather up to 104 F.
• 
  Auto Detection. Auto Repair. Improved Performance.
• 
  The GENIUS10 automatically detects sulfation/acid stratification. If any is found, the GENIUS10 will automatically repair and reverse the damage done to the battery, extending the usable life and increasing the performance.
  Year-Round Charging. Zero Overcharge. Auto Memory.
• 
  Finally a charger from start to finish that’s completely automatic. No special modes, no technical knowledge required. Genius will safely charge any battery. Detect damaged batteries and intuitively repair them. And actively monitor for long-term battery maintenance and extend battery life. This system allows for continuous operation without user intervention, and zero risk of overcharging your battery.
  Improved Clamping Range. Improved Clamping Force.
• 
  Genius clamps are built with needle-nose profiles for smaller terminal applications and detachable integrated eyelets for permanent mounting the accessory to battery. Designed to fit battery terminals of any shape and size. Engineered for improved clamping range, clamping force, and higher conductivity.